Need help? 24 hours online : +8613916614261


Welcome to our Online Store!


Graphitization induction furnace for carbon fiber materials

Min.Order Quantity: 1 Set/Sets Graphitization induction furnace for carbon fiber materials

Supply Ability: 2 Set/Sets per Month Graphitization induction furnace for carbon fiber materials

Payment Terms: L/C,T/T,


  • Product Details
  • Technical Parameters
  • Send Inquiry

 Graphitization induction furnace for carbon fiber materials

Product description

The best vacuum furnace manufacturer in China. Continuous high temperature graphitization furnace is a new type of high temperature graphitization furnace developed by our company on the basis of the existing horizontal ultra-high temperature graphitization furnace. It is mainly used for high temperature treatment such as graphite powder purification. Its service temperature can reach 2800 ℃, and it can work continuously for a long time. High production efficiency, energy saving and power saving. With on-line temperature measurement and control system, the temperature in the furnace can be monitored in real time and adjusted automatically

Product overview

The working temperature is very high, up to 3000 ℃, and can work for a long time at 2600-2800 ℃. Good temperature uniformity, long constant temperature zone and low equipment operation failure rate.

The service life of the furnace tube is long, and the furnace can be continuously produced for 20-30 days. Infrared temperature measurement and control system, real-time display and PID automatic control of furnace temperature, and the product quality is stable. At the same time, ensure the product requirements. Three phase power supply mode is adopted, with balanced three-phase power supply and stable performance. Different from the carbon tube furnace with single-phase power supply, the phase voltage is unbalanced, which has a great impact on the power grid and the operation of other equipment.

Automatic feeding device is adopted to control the feeding and discharging of materials regularly. High degree of automation, low labor intensity of workers, consistent high-temperature processing time of products. Carbon felt is used as insulating material. Carbon black is not used. Carbon tube replacement is convenient, clean and sanitary.

Boat pushing production mode is adopted for continuous production without boiler shutdown. And gap type (vertical furnace) the furnace is different. The furnace must be shut down after each furnace is burned, and the materials cannot be taken out after cooling. The production efficiency is low and the energy consumption is high. The materials of the continuous high-temperature graphitization furnace are in the boat, and the materials will not cause secondary pollution. The product volume of each boat is about 1.5kg. The product quality can be sampled and tracked in time, and the process can be corrected according to the test results without shutting down the furnace Less waste. The heating time is short, up to 600 ℃ / hour.

The furnace body has good air tightness and low protective gas loss. All flanges and furnace covers are sealed with sealing strips. The furnace liner and flange are made of stainless steel, which is free from rust and has a long service life. Equipped with vacuum pump for gas replacement in the furnace, the ventilation time is short and the gas consumption is low.

Horizontal high temperature graphitization furnace parameter

 

Product model IVG-130H IVG-200 H IVG-260 H IVG-300 H IVG-500 H
specifications (diameter x length mm) Φ400×1000 Φ500×1000 Φ600×1200 Φ700×1600 Φ900×1600
IF power supply Kw 130 200 260 300 500
IF power supply frequency Hz 1500 1000 1000 1000 1000
Maximum operating temperature °C 3000 3000 3000 3000 2850
Ultimate vacuum Pa 1.2×10-1 1.2×10-1 1.2×10-1 1.2×10-1 1.2×10-1
Pressure rise rate Pa/h 0.67 < 0.67 0.67 0.67 0.67
Constant temperature zone temperature difference °C ±10 ±10 ±10 ±10 ±15

Shanghai Geheng Vacuum Technology Co., Ltd. is a vacuum heat treatment furnace manufacturer with many years of experience in design, manufacturing and production. Mainly produce vacuum heat treatment furnace, vacuum sintering furnace, vacuum brazing furnace, New Energy And Environmental Protection Equipment and Vacuum Carbonization Furnace .Provide customized services, equipment work area can be based on customer output.

 

 

 

 


Fill in your product requirements and get solutions or product quotes by sales siwen

Your request will be answered within one working day.

Related Products

High temperature alloy steel resistance heating vacuum sintering furna

High temperature alloy steel resistance heating vacuum sintering furna

Product Details

Horizontal high temperature and high pressure vacuum sintering furnace

Horizontal high temperature and high pressure vacuum sintering furnace

Product Details

1200C vacuum diamond dressing tool high vacuum brazing furnace  2*10-4

1200C vacuum diamond dressing tool high vacuum brazing furnace 2*10-4

Product Details

Laboratory vacuum tube furnace

Laboratory vacuum tube furnace

Product Details