Home > Vacuum Furnaces > Vacuum Debinding & Sintering Furnace

Tungsten Carbide Scrap Recycling Heat Treatment Vacuum Sintering Furnace

Min.Order Quantity: 1 Set/Sets Tungsten Carbide Scrap Recycling Heat Treatment Vacuum Sintering Furnace

Supply Ability: 2 Set/Sets per Month Tungsten Carbide Scrap Recycling Heat Treatment Vacuum Sintering Furnace

Payment Terms: L/C,T/T,

Price: Online consultation

Get Quote
Contact Us

Product Details
Technical Parameters
Send Inquiry

Application:

The equipment is intermittent resistance furnace, mainly used for PI film, radiation proof material, ain material, ain film, AIN ceramic, rare earth oxide, ceramic material, carbide, tungsten carbide, silicon carbide, powder metallurgy, used for degreasing, degumming, dewaxing, degreasing, sintering and other purposes of gemstone, Rh material, polysilicon material, graphite and carbon material.

Main configuration:

1. Furnace door: rotating hinge locking; manual / automatic locking

2. Furnace shell: all carbon steel / stainless steel inner layer / all stainless steel

3. Furnace boiler: soft carbon felt + hard combination felt / full hard combination felt.

4. heater material: hydrostatic graphite / three molded graphite.

5. Muffle material: fine graphite

6. Gas path control: Volume / mass flow calculation, manual / automatic valve, imported / domestic

7. Vacuum pump and vacuum gauge: imported / domestic

8. Skip: roller / forklift

9. Operation panel: analog screen / touch screen / industrial computer

10. PLC: Delta / Omron / Siemens / MITSUBISHI

11. Temperature controller: Electric Island / Mainland

12. Thermocouple: C index (wolfram tube / molybdenum tube / ceramic tube)

13. Recorder paperless recorder / paper recorder, imported / domestic

14. Electrical components: Chint / Schneider / Siemens / ABB

Technical features:

1. Adopt special furnace boiler structure and heater layout, with good furnace temperature uniformity.

2. Special structure of degreasing box is adopted, which has good sealing effect and no pollution.

3. It has flexible vacuum, vacuum sintering, micro positive pressure sintering and other functions.

4. Adopt the most favorable thermal insulation structure and materials, the furnace has good thermal insulation performance and less heat storage, saving more than 25% energy than the traditional design.

5. Touch screen operation, PLC centralized control, simple operation, high reliability.

6. It has over temperature and over pressure fault alarm, mechanical automatic pressure protection, action interlock and other functions, with high safety.

7. It has the functions of remote operation, remote fault diagnosis and remote software upgrade.

Model Parameter		Lab usage	Production usage
Model Parameter		NTI-DZL-54W	NTI-DZL-98W	NTI-DZL-243W	NTI-DZL-300W	NTI-DZL-400W	NTI-DZL-720W
Working size	mm	300×300×600	350X350X800	450×450×1200	500×500×1200	500×500×1600	600×600×2000
Control process		Thyristor control
Heating type	/	Resistance heating
HT zone capacity	L	54	98	243	300	400	720
Loading weight	g	HT zone capacity × density (g/cm³)×1000 Remark:1L=1000cm³
Ultimate vacuum	Pa	20
IF power	Kw	100	200	210	240	270	378
Heating zone	Zone	1	3	3	3	3	3
Max. working temperature	ºC	2300	2300	2300	2300	2300	2300
Usual working temperature	ºC	2200	2200	2200	2200	2200	2200
Temperature uniformity	ºC	±5	±5	±5	±5	±5	±5
Working environment	/	Vacuum or argon atmosphere protection( micro positive pressure)