Need help? call us +86-13916614261


Welcome to our Online Store!


SiC vacuum sintering furnace

Min.Order Quantity: 1 Set/Sets SiC vacuum sintering furnace

Supply Ability: 2 Set/Sets per Month SiC vacuum sintering furnace

Payment Terms: L/C,T/T,


  • Product Details
  • Technical Parameters
  • Send Inquiry

Purpose of SiC vacuum sintering furnace:
This equipment is suitable for vacuum sintering of boron carbide, silicon carbide or other materials and pressureless sintering in atmosphere.


SiC Vacuum Sintering Furnace Basic parameters:
1 tow 1 standard structure configuration (1 set of power supply and 1 set of furnace body)
Maximum operating temperature: 2350 C, commonly used temperature 2300 C, commonly used constant temperature zone size (600MM *600MM *1600MM, 500MM *500MM *1300MM). Customize any size according to customer's product requirements
Deviation in mean temperature range: < 10.0
Temperature control mode: automatic, manual, room temperature to 1200 degrees using thermocouple temperature measurement, high temperature using imported infrared thermometer temperature measurement. Low temperature and high temperature automatic switching.
Safety: Safety and reliability with explosion-proof orifice and relief valve
Automation degree: automatic replacement of atmosphere in one-key furnace, automatic detection of water and air, automatic temperature control in the whole process
Temperature Control Accuracy: +5
Cold limit vacuum: 3Pa
Working temperature: 2250 C (Argon atmosphere)
Design temperature: 2350 C (Argon atmosphere)
Heating rate: > 10 C/min (full load, atmosphere, below 1500 C)
More than 5 C/min (full load, atmosphere, 1800-2300 C)


Advantages of SiC Vacuum Sintering Furnace
1. High degree of automation, can achieve one-button replacement (furnace vacuum, argon flushing process), automatic monitoring of water and electricity throughout the operation process, touch screen simulation can observe the operation status of equipment at any time, equipment alarm instructions, heating curve, switch operation can be viewed and operated on the touch screen.
2. Real material and solid material. The furnace body is made of 304 stainless steel. It is built strictly according to the standard of pressure vessel. It has good corrosion resistance and sealing performance. The insulation materials are all made of high purity graphite felt, which is durable. All electrical components are imported or top brands, reliable operation.
3. It is safe and reliable to install an automatic explosion-proof valve in the furnace body. The flow switch is installed separately in the inductor part to monitor the water flow in real time. The over-current value and over-voltage value of the power supply are set strictly and effectively according to the requirements.

TIM截图20190409145107.jpg


Fill in your product requirements and get solutions or product quotes by sales admin

Your request will be answered within one working day.

Related Products

vacuum hot pressing furnace

vacuum hot pressing furnace

Product Details

HIQ-1400VF vacuum atmosphere furnace

HIQ-1400VF vacuum atmosphere furnace

Product Details

Three-Chamber Horizontal High Temperature Brazing Vacuum Furnace

Three-Chamber Horizontal High Temperature Brazing Vacuum Furnace

Product Details

Heat Treatment Vacuum Crucible Melting Furnace

Heat Treatment Vacuum Crucible Melting Furnace

Product Details