Hot Press Sintering Furnace

In addition to the price of Hot-pressing Sintering furnace, its operating rules should also be firmly grasped. Many people have neglected this point. Today, we will give a specific explanation in this regard, so that we can expand and deepen on the original basis, make ourselves more Hot-pressing Sintering furnace, and use it correctly in practice, so as to improve our work efficiency.
Guidelines for Rapid Operation of Hot Pressed Sintering Furnace
1. Check whether the circuit and waterway are normal, such as normal electricity, water.
2. Open the mechanical pump, slowly open the pre-suction valve after 30 seconds, and open the front valve after 1 minute.
3. Turn on the diffusion pump and heat the diffusion pump when the vacuum is below 10 Pa.
4. After 60 minutes of heating, the diffusion pump closes the pre-pumping valve and opens the high vacuum valve. The vacuum degree will gradually reach high vacuum.
5. Heating start-up. Please choose manual heating below 200 degrees. In the manual operation menu of the control panel, pay attention to the fluctuation of the dial button once when it is first used, and then dial it to the manual position to start heating. Input 50 or so to confirm. Current is generally controlled below 300A.
Therefore, it is very necessary for us to understand its operation in the use of Hot-pressing Sintering furnace. I hope you will pay attention to it.