Aluminium alloy material annealing furnace

Min.Order Quantity: 1 Set/Sets Aluminium alloy material annealing furnace

Supply Ability: 2 Set/Sets per Month Aluminium alloy material annealing furnace

Payment Terms: L/C,T/T,

1. Furnace Type: Forced Hot Air Circulation Resistance Heating Furnace

2. Loading capacity: 50T

3. Maximum temperature of furnace: 620 degrees Celsius

4. Annealing Temperature of Metals: 150 ~480 Temperature

5. Power parameters: 380V + 10% 50Hz

6. Heater installation power: 540 kw

7. Number of heating zones: 3 zones

8. Temperature Control Mode: Timing Control and Temperature Proportional Control and Constant Temperature

9. Furnace temperature difference: not more than 3 C (when blower is opened)

10. Metal temperature difference at the end of heat preservation: less than 3 C

11. Loading and unloading methods: one-dimensional and three-dimensional composite materials (vertical rise and fall)

12. Cooling water consumption: 6t/h;

13. Compressed air consumption: instantaneous 5 m3/min

14. Furnace size: 10605 x 4340 x 7680 mm (long x width * high)

15. Fan parameters: axial flow fan, low pressure and large air volume

Wind pressure: 50mmH_2O

Air volume: 145000 m3 / h

16. Heater: clamp type, installed on both sides of the furnace body;

Model	Temperature Uniformity Size (WHL)	Max. Temperature	Ultimate Pressure	Pressure raising rate	Temperature Uniformity	Loading Capacity
RVA-448	400400800mm	1300℃	6.7*10-3Pa	0.67Pa/h	±5℃	100Kg
RVA-459	450450900mm	1300℃	6.7*10-3Pa	0.67Pa/h	±5℃	150Kg
RVA-669	600600900mm	1300℃	6.7*10-3Pa	0.67Pa/h	±5℃	200Kg
RVA-6612	6006001200mm	1300℃	6.7*10-3Pa	0.67Pa/h	±5℃	300Kg
RVA-7712	7007001200mm	1300℃	6.7*10-3Pa	0.67Pa/h	±5℃	500Kg
RVA-8812	8008001200mm	1300℃	6.7*10-3Pa	0.67Pa/h	±5℃	800Kg
RVA-3575	3503507500mm	1300℃	6.7*10-3Pa	0.67Pa/h	±5℃	1000Kg
RVA-11630	11006003000mm	1300℃	6.7*10-3Pa	0.67Pa/h	±5℃	3000Kg
RVA-V1110	Φ1100*1000mm	1300℃	6.7*10-3Pa	0.67Pa/h	±5℃	2000Kg