X Series Single Stage Rotary Vacuum Pump

 

X-series single-stage rotary vane vacuum pump is a new product which can extract a large amount of water vapor. Because the pump itself has oil regeneration device and reliable gas-ballast device, the service life of the pump oil is prolonged. The basic equipment for vacuum extraction from sealed container is suitable for manufacturing electronic devices, vacuum drying, filtration, impregnation, coating, welding, smelting and laboratory equipment.

 

 

1. Compared with XD series single-stage vacuum pumps, the vacuum pump with sliding valve can control noise by adjusting the silencing needle valve. Because of its small eccentric mass and balanced rotor, the vibration of the sliding valve vacuum pump is small.

 

2. X series rotary vane vacuum pump has high pumping efficiency.

 

3. X series rotary vane vacuum pump has good air-ballast performance.

 

X series rotary vane vacuum pump has a specially designed gas ballast device to fill the exhaust chamber with dry gas, thus greatly reducing the partial pressure of steam in the exhaust gas. When the saturated vapor pressure is lower than the pump temperature, the pump can be discharged with the filling air, thus avoiding condensation in the pump.

 

4. X series rotary vane vacuum pumps are equipped with temperature-controlled water regulating valves.

 

When the pump works, the temperature of the pump can be adjusted to 75oC (+5oC) by adjusting the water pressure provided by the pump itself, so as to increase the discharge pump, but the temperature of the pump should not exceed 80oC (temperature measuring point of the tank).

 

5. X series rotary vane vacuum pump has oil-water separator.

 

It can store impurities and condensates in the pump oil to the bottom of the oil-water separator, and discharge the pump through the drain valve installed at the bottom.