Oil seal vacuum pump advantages:
1: Dual-stage and high-speed direct connection structure.
2: Equipped with air ballast valve specially designed to prevent mixing of water pump and oil pump, prolong the working time of pump.
3: Adopt international similar product design, small size, light weight, low noise, easy to start, long time stable operation.
4: No oil leakage, no oil injection, environmental protection.
5: Pumps can be used as either suction pumps alone, booster pumps, diffusion pumps and molecular pumps, as well as maintenance pumps or front pumps in the system.
6: Widely used in electronic vacuum device manufacturing, refrigeration industry, medical analysis device industry, solar energy industry, electric light source industry, vacuum furnace industry and scientific research units.
Oil seal vacuum pump Attention:
This pump is one of the basic equipment for discharging sealed containers. It can be used not only as a main separate pump, but also as a front-stage pump of booster pump diffusion pump and molecular pump, or as a maintenance pump of vacuum system and a pre-pump of different types of pumps. Therefore, it can be used in the electric vacuum industry, vacuum bottle manufacturing, vacuum welding and as an accessory to precision instruments or instruments that need vacuum. Because of its small size, light weight and quiet, it is more suitable for laboratory use. Operation.
2. The pump is allowed to work continuously for several hours at atmospheric pressure of 5 C-40 C and intake pressure of 1 230 PA. The pump gas of the pressure valve with relative humidity greater than 90% should be opened.
3. Open the intake to the atmosphere so that the pump can not work for more than one minute.
4. Pumps are not suitable for pumping peroxides, poisons, explosive and corrosive gases, and gases that react with pump oil contain dust particles.