Water ring vacuum pump, 2bv-2061 vacuum pump is a crude vacuum pump, mainly used for the extraction of explosive gas, and in all kinds of flammable, explosive environment, its performance parameters and 2BV2, 2BV5 series corresponding models are the same.
Main advantages of 2bv-2061 vacuum pump:
1) 2bv-2061 vacuum pump is simple in structure, low in manufacturing accuracy and easy to process.
2) 2bv-2061 vacuum pump even suction, stable and reliable work, simple operation, easy maintenance.
3) compact structure, high pump revolution, generally can be directly connected to the motor, no reduction device, so the use of small structure size, can get a large amount of air, small area.
4) the compressed gas is basically isothermal, that is, the domestic temperature of the compressed gas changes little.
5) since there is no metal friction surface in the pump chamber, no lubrication is required in the pump, and the 2bv-2061 vacuum pump has very little wear, the sealing between rotating parts and fixed parts can be directly completed by water seal.
2bv-2061 vacuum pump product specifications are as follows:
Power: 1.45kw Max inspiration: 52m3/h ultimate vacuum: -0.098mpa (33mbar)
Speed: 2880 RPM noise: 65db weight: 35kg
Common failures of 2bv-2061 vacuum pump
One, 2bv-2061 vacuum pump can not start or start the noise
Possible reasons: insufficient motor supply voltage; Motor phase break operation; Pump for a long time did not cause corrosion; Impurities sucked into the pump; The impeller tows the distributing plate.
Exclusion method: check whether the supply voltage is too low; Check whether the motor wiring is reliable; If the pump for a long time does not cause corrosion can add a little rust remover or open the pump cover to remove the rust artificially; Open pump cover to remove sundries; Adjust the distance between the impeller and the distributing plate.
2BVA series water ring vacuum pump is a single stage pump with coaxial pump. Shaft seal USES mechanical seal, with simple structure, easy installation, no oil, safe and reliable characteristics. This series of vacuum pump is suitable for the suction of atmospheric and humid steam, the lowest suction pressure up to 33mbar(3300pa) and SK, 2SK series pump technical performance (pumping speed similar), more can meet your requirements.
The pump body, pump cover and disc are cast iron and the impeller is bronze.
Container vacuum, condenser vacuum, water extraction system, plastic forming (degassing), hospital sterilization and central suction, beverage filling production line, in addition, 2BVA series vacuum pumps are also used in petroleum, chemical, pharmaceutical, power, metallurgy and other industries.
Pump model: 9 specifications available: limit vacuum: 33HPa
Motor power: 1.1-15kw exhaust volume: 0.45-9m3/ min
Ultimate pressure: 33mbar(3300pa)