Home > Vacuum Pumps > Liquid Ring Vacuum Pump

One Stage Water Ring Vacuum Pump

Min.Order Quantity: 1 Set/Sets One Stage Water Ring Vacuum Pump

Supply Ability: 400~700 Set/Sets per Month One Stage Water Ring Vacuum Pump

Payment Terms: L/C,T/T,

Get Quote
Contact Us

Product Details
Technical Parameters
Send Inquiry

One Stage Water Ring Vacuum Pump is suitable for pumping gas and steam. Its suction pressure can reach 33 mbar (ABS) (97% vacuum). If transformer oil is used as working liquid, these pumps are called oil ring vacuum pumps, and the suction pressure can reach 6.7 mbar (ABS) (i.e. the vacuum degree is 99%). Therefore, the oil ring vacuum pump can completely replace the reciprocating vacuum pump. When the liquid ring vacuum pump works for a long time under the condition of close to the limit vacuum, it is necessary to connect with the cavitation protection pipe to eliminate the scream and protect the pump.

When the compressor is working, the maximum pressure is 0.26mpa (ABS). The higher the discharge pressure, the greater the power of the compressor. Therefore, exhaust pressure data must be provided to select the appropriate motor.

2BV series water ring vacuum pump and compressor will completely replace SK and 2SK series water ring pump and W, WY, WL series reciprocating vacuum pump with its superior performance and advantages.

One Stage Water Ring Vacuum Pump and compressor are mainly used to pump explosive gas or work in flammable and explosive environment. The technical parameters of each type are the same as the corresponding types of 2bv2 or 2bv5 series products.

Code	Item	Content	Content	Content

1.	Main parameter
1.1	Pump type	2BV2060-EX	2BV2061	2BV2070-EX
1.2	Max. suction capacity(water temperature is15 degree Celsius)	27m 3 /h	52m 3 /h	80m 3 /h
1.3	Limited vacuum (when the water temperature is at 15 degree Celsius)	33mbarA	33mbarA	33mbarA
1.4	Motor
1.4.1	Power	1.1kW	1.45kW	3kW
1.4.2	Voltage/Phase/Frequency	380V/3Phs/50Hz	380V/3Phs/50Hz	380V/3Phs/50Hz
1.4.3	Protection Class/Insulation Class	IP55/dIIBT4	IP54/F	P55/dIIBT4
1.5	Operating liquid consumed	2L/min	2L/min	2.5L/min
1.6	Speed	2840rpm	2840rpm	2860rpm
1.7	Drive type	Direct drive(motor and pump are set on the same shaft)
2.	Main parts' material construction
2.1	Impeller	SUS304 (0Cr18Ni9)	SUS304 (0Cr18Ni9)	SUS304 (0Cr18Ni9)
2.2	Port plate	SUS304 (0Cr18Ni9)	SUS304 (0Cr18Ni9)	SUS304 (0Cr18Ni9)
2.3	Pump cover	HT200	HT200	HT200
2.4	Casing	HT200	HT200	HT200
2.5	Shaft	2Cr13	2Cr13	2Cr13
2.6	Mechanical seals	John Crane Ceramics/graphite/fluororubber/316
2.7	Pipe for cavitation protection	PTFE	PTFE	PTFE
2.8	Seal for cover	NBR	NBR	NBR
2.9	Intercepting plate	0Cr18Ni9(SUS304)	0Cr18Ni9(SUS304)	0Cr18Ni9(SUS304)
2.10	Bearings	NSK	NSK	NSK