belt driven liquid ring compressor overview:
2BE series liquid ring vacuum pumps are formed by single-stage single-acting structure, which has the advantages of simple structure, convenient maintenance, high efficiency, energy saving and reliable operation. The design of pump shaft, impeller and pump is optimized. Distribution board for key components. Ductile iron impellers and welded impellers formed by stamping have been well heat treated and balanced, and they are dynamically balanced before and after interference heat pack. The operation is more stable and the impact resistance is better. Suitable for large displacement and load. Severe conditions such as shocks and fluctuations.
2BE series liquid ring vacuum pump, independent gas-water separator; multi-position intake and exhaust outlet, exhaust valve on pump cover inspection cover window, assembly and maintenance is more convenient.
belt driven liquid ring compressor Application :
1. The pump can work continuously for a long time at ambient temperature of 5-40 C and inlet pressure of less than 1330 Pa.
2. Pumps are not suitable for removing oxygen, toxic, explosive, corrosive to metals, chemical reactions to pump oil, and gases containing particulate dust. They are also not suitable for gases from A. Transfer to another container for transfer pump.
3. The continuous working time of the pump at the atmospheric inlet pressure to 600Pa shall not exceed 3 minutes, so as not to cause damage to the pump due to poor injection or lubrication.
4. All bearings adopt NSK or NTN original imported bearings to ensure the accurate positioning of 2BE1 vacuum pump impeller and high running stability.
belt driven liquid ring compressor Characteristics :
1. All the impeller materials are welded by ductile iron or steel plate, which fully guarantees the stability of the impeller of 2BE1 vacuum pump under various adverse conditions and greatly improves the service life of 2BE1 vacuum pump.
2. The pump body is made of steel plate, which improves the service life of 2BE1 vacuum pump.
3,2BE1 vacuum pump bushing is made of high chromium stainless steel, which is five times longer than ordinary materials.
4. The belt pulley (belt drive) adopts the standard high-precision conical belt pulley, which has reliable operation, long belt life and convenient disassembly.
5. The couplings (direct transmission) are made of standard high strength elastic couplings, and the elastic parts are made of polyurethane materials. They are stable and reliable in operation and have long service life.
6. Unique top-mounted air-water separator can save space and effectively reduce noise.
7. All castings are made of resin sand with good surface quality. The surface of castings does not need greasy, so 2BE1 vacuum pump has good heat dissipation effect.
8. Mechanical seals (optional accessories) are imported parts, fully ensuring that 2BE1 series vacuum pumps do not leak in long-term operation.