Need help? call us +86-13916614261


Welcome to our Online Store!



stainless steel light vertical multistage pump installation

Stainless steel light vertical multi-stage pump is a multi-functional product, which can transport various media from tap water vertical multi-stage pump (3 pieces) to industrial liquid. It is suitable for different temperature, flow rate and pressure range. Stainless steel multi-stage pump is suitable for non corrosive liquid and CDLF is suitable for mild corrosive liquid.


In the installation of light stainless steel light vertical multi-stage pump, if you do not pay attention, it is likely to be unable to install normally, which will also bring great harm to the future use of equipment. The following will tell you about the installation errors and solutions of the light vertical multi-stage pump, which I believe will be of great help to you.

Stainless steel light vertical multistage pump.jpg


Installation errors and solutions of stainless steel light vertical multistage pump:


1. The elbow in the inlet pipe passes through the multi-stage pump, which increases the flow resistance to a certain extent. The elbow should rotate in a straight direction. We need to be careful not to rotate horizontally. The purpose is to prevent the accumulation of air.


2. The horizontal section is horizontal or upward, which will allow air to accumulate in the intake, reduce the vacuum of the water pipes and pumps, reduce the suction head of the light vertical multistage pump, and reduce the water output.


If you want to fix this problem, you need to re install it. In the process of installation, it should be noted that the horizontal part should be slightly inclined towards the water source, and there will be no horizontal situation and no upward tilt.


3. The water inlet is directly connected with the elbow. If it is directly butted, when the water flows into the impeller through the elbow, the uneven walking will occur. The diameter of the inlet pipe will be larger than that of the pump. The diameter pipe of the equipment will deviate. Some diameter pipe planes need to be installed at the top and the slope below. Otherwise, the air will be collected, the output of water will be reduced, or the water will not be pumped, and there will be a percussion sound.


4. The outlet of the water outlet pipe is not higher than the normal water level. If the water outlet is at the normal water level, increase the pump head, because the flow will be weakened. Due to the terrain, there will be some problems in the work.


Please pay special attention that the outlet must be higher than the water level of the pool. Elbows and short pipes need to be added directly to the nozzles of light vertical multistage pumps. The height of the nozzle is not easy to cause problems. The multi-stage pump is also very effective in operation.


When installing the stainless steel light vertical multi-stage pump, if the above errors occur, you need to master the corresponding solutions, and then you can more smoothly solve the errors of the multi-stage pump and make the multi-stage pump run normally. I also believe that as a professional operator, you must have a very detailed understanding of stainless steel light vertical multi-stage pump before operation, so as to operate the equipment better.


Related Products

Positive Displacement  blower Blower

Positive Displacement blower Blower

Product Details

HIQ-1400VF vacuum atmosphere furnace

HIQ-1400VF vacuum atmosphere furnace

Product Details

CL Sereis liquid ring compressor in cond

CL Sereis liquid ring compressor in cond

Product Details

Low price Industrial Circulating water v

Low price Industrial Circulating water v

Product Details