liquid ring vacuum pump for water vapor handle
The liquid ring vacuum pump is no stranger to you. It can effectively handle water vapor. To solve this problem, we will introduce it to you.
The liquid ring vacuum pump is a valve installed in the intake pipeline to adjust the vacuum degree and flow rate. Valves in any form are installed in the exhaust pipeline to regulate the pressure of the compressed gas. When the compressed gas is not allowed to be discharged according to its operating conditions, a guide pipe should be installed between the exhaust pipe and the exhaust pipe. Its diameter is the same as that of the valve installed on it, so as to regulate the gas volume to a great extent.
The technology of liquid ring vacuum pump to effectively treat steam dry pump is now widely used in metallurgical and heat treatment applications. Recently, some of the world's largest dry pump systems have been installed for large-scale steel-making exhaust. Smaller systems are used to treat refined steel and super heat resistant stainless steel. The process uses electromagnetic induction to melt metals in vacuum. This will induce eddy current in the metal - the induction source is the induction coil, which has alternating current. The eddy current heats and melts the load. Metallurgical processes like this produce a certain amount of condensable water vapor, which contains water vapor. Oil-sealed rotary piston pumps used to be the most common type of pumps used in these treatment processes, but with such pumps, water vapor will be mixed with lubricating oil, resulting in aging of lubricating oil, and increase the wear degree of pumping mechanism.
The exhaust pipe of the liquid ring vacuum pump or compressor is connected with the intake pipe of the gas-water separator. When used as a compressor, the exhaust pipe of the gas-water separator is connected with the system utilizing compressed gas. Generally, it is required that the pipeline should not be too long and the turning should not be too fast. When used as a vacuum pump, the gas is discharged from the exhaust port of the gas-water separator to the atmosphere. In order to improve the working environment, the gas can be discharged through the pipeline outside the working place.