Need help? call us +86-13916614261


Welcome to our Online Store!



Pipeline heating and heat preservation of vacuum oiling equipment

Pipeline heating and heat preservation of vacuum oiling equipment

Posted on 2020-03-31 10:46:54 by antsalliance

​Most of the feeding pipes and pouring pipes have no heating device. When the ambient temperature is low, the viscosity of the material increases and the flow is difficult. If the temperature is too low, the feed pump will idle and the service life of the [....]

Cleaning of vacuum drying equipment with variable pressure method

Cleaning of vacuum drying equipment with variable pressure method

Posted on 2020-03-31 10:30:18 by antsalliance

​Can be divided into regular cleaning and cleaning at any time. The cleaning operation at any time is to empty the residual resin in the final mixing tank and pouring pipe after each pouring, close all valves, and inject the curing agent mixture into the [....]

Final mixing and pouring process of vacuum oiling equipment

Final mixing and pouring process of vacuum oiling equipment

Posted on 2020-03-31 10:15:46 by antsalliance

This process is to make the degassed resin and the curing agent mixture, after the final mixing and stirring evenly, carry out the vacuum pouring process. The pouring process is manual operation, and the flow rate and flow rate are controlled manually to [....]

Low pressure injection molding of ceramics

Low pressure injection molding of ceramics

Posted on 2020-03-30 11:20:29 by antsalliance

1. Preparation of raw materials: the raw materials used in the low-pressure injection molding method are any hard powder: wrought aluminum, clay or clay, nitride, carbide, etc. The particle size can be from 600 μ m to submicron (ultra-fine). The best bind [....]

high temperature alumina ceramic roller application

high temperature alumina ceramic roller application

Posted on 2020-03-30 11:10:05 by antsalliance

Ceramic roller can be divided into high temperature oxide ceramics (such as Al2O3, ZrO, MgO, Cao, ThO2, Cr2O3, SiO2, BeO, 3Al2O3 · 2SiO2, etc.), carbide ceramics, boride ceramics, nitride ceramics and silicide ceramics, etc. according to the main chemical [....]

ceramic roller Instructions

ceramic roller Instructions

Posted on 2020-03-30 10:51:02 by antsalliance

The correct and professional use of ceramic sticks is directly related to its service life and has a great impact on the improvement of production efficiency. Here is a summary of its relevant knowledge for you.

[....]

difference between silicon carbide ceramics and silicon nitride ceramics

difference between silicon carbide ceramics and silicon nitride ceramics

Posted on 2020-03-30 10:40:25 by antsalliance

Silicon carbide is generally used as shed plate, silicon nitride as ball or special-shaped part. The hardness of silicon nitride is higher than that of silicon carbide. The service temperature of silicon carbide ceramics is 1380 ℃, and that of silicon nit [....]

vacuum annealing furnace application and working mode

vacuum annealing furnace application and working mode

Posted on 2020-03-27 11:30:25 by antsalliance

Vacuum annealing furnace does not need to add any gas protection, can ensure that the product does not oxidize, does not change color, really do not need follow-up treatment, the product is directly used.

Due to the special design of the outer tank hea [....]

 1548   <| < 17 18 19 20 21 22 23 24 25 26 > >|