Water jet vacuum pump
一、 Overview of water jet vacuum pump:
Water jet vacuum pump adopts a reinforced pp plastic injection molding, has high mechanical strength, strong corrosion resistance, the surface is bright and clean, simple structure, small volume, similar products in the current, the service life of the longest, largest displacement, high vacuum degree, etc, is a place of SZ type water ring pump and W series of reciprocating vacuum pump to the ideal product.
Water injection pump can pumping corrosive gas temperature within 150 ° C, can be used with steam injection pump in series, the vacuum degree is higher, is widely used in chemical, pharmaceutical, textile, food, brewing, metallurgy, environmental protection and other industries, the main application of the vacuum absorption, vacuum filter, vacuum concentration, vacuum, vacuum conveyor, vacuum oxygen increases oxygen, vacuum technology, etc. The company can provide a complete set of horizontal sets. Users can also select the company's production of corrosion - resistant pump, check valve, pipeline and other series of supporting products.
二、 Materials and features of water jet vacuum pump:
Material: the nozzle is ceramic and the rest is polypropylene.
1. Stable performance.
2. Large amount of gas extraction.
3. Low noise
4. Corrosion resistance
三、 Water injection vacuum pump installation:
Select the power size of the centrifugal pump according to the specifications of the water pump, and the flange connection shall be made of acid-proof rubber pad, which shall be symmetrical and strong, and shall not leak.
2. The water pump misconducts must be connected with the same specification as the outlet, with a length of 1.5 meters in the tail pipe and perpendicular to the pump body.
3. The circulating water shall be in and out of the water. To keep the water cool and prevent air from entering the pump body.