Understanding Pressure Sintering Furnace
Pressure sintering furnace is widely used in our life. What work should we prepare before using it?
1. Checking the condition of pressure sintering furnace requires that the vacuum furnace should be hygienic at the first level, the induction coil should be well insulated, the sealing vacuum tape should be elastic and the size should be qualified.
2. Check whether the lever handle of pressure sintering furnace is flexible to start.
3. Check whether the rotating Maxwell vacuum gauge meets the requirements.
4. Check the graphite crucible and whether the furnace fittings are complete.
Check the power supply system of pressure sintering furnace, belt disc belt tightening, whether pressure sintering furnace oil is located in the middle line of oil seal observation hole, add grease at least twice a week.
After reading the introduction above, I believe that everyone has a certain understanding of it. If you have any questions, please call for consultation, we are dedicated to serving you.