Precautions for use of vacuum induction melting furnace
When conducting induction smelting operation, we should be careful and careful. In the process of operation, we should pay more attention to personal safety and protect the equipment.
During vacuum induction melting operation part, should be carried out in accordance with the relevant operation process, if not in accordance with the operating rules, is easy to vacuum pump body is damaged, resulting in a serious accident, will not only harm health, life and damage to equipment will also have a certain role.
In smelting operation, should beware of electric shock, such as electrode, rotating electrode copper wires, copper power supply box with a certain capacity, so be sure to properly insulating protection, so it can avoid electric shock. You also need to protect your eyes. If the temperature is too high, you need to cover the screen of the observation hole. If necessary, you need to wear sunglasses.
When smelting, attention should be paid to maintain a good environment, attention to ventilation, need to mechanical pump out of the airway to the outside of the window. At the same time, the floor needs to be wiped dry, no water allowed. During the whole process of smelting, the circulation of circulating water should be ensured.
After all the operations are completed, if cooling water is needed, it will take some time, usually two hours.
After using the vacuum furnace for a period of time, the vacuum furnace should be wiped, especially at the dead corner, where dirty things can be easily accumulated, and safety should be paid attention to in the process of wiping the vacuum furnace. If alcohol, acetone and other flammable liquids are used to clean the vacuum furnace, the body should be above the furnace.
In the course of operation to do a good job of fire prevention, should be ready at any time a basin of sand. In the process of operation, you should also wear work clothes and gloves. Mask. Try not to expose your skin.