Metal heating vacuum sintering furnace
Metal high temperature sintering system adopts metal heater, specially designed for contact sintering process of vacuum arc extinguishing chamber. High efficiency and low production cost.
The high temperature sintering system consists of a double water cooled furnace shell, electrodes, heating body, temperature measuring device, cooling water device, vacuum system, power supply and control cabinet (dewaxing device and atmosphere treatment device if required). According to different process requirements, the furnace shell material is stainless steel. The furnace body is horizontal design. The largest number of heating control can achieve the eight (or more), by adjusting the number of the hot spots and layout can obtain excellent are warm, part of the furnace can be better than that of plus or minus 2 ° C.
For vacuum pumping, you can use a large number of different types of pump sets and all the well-known brands in the market. Pressure ranges from 0.1 mbar (10 Pa) to 1·10-5 mbar (1·10-3 Pa) are available according to process requirements.
The sequence of programs controlled by microprocessors ensures full automation and repeatability of processes as well as stable product quality. The computer operation interface and the corresponding data processing system can meet the requirements of high reliable quality control.
The highest working temperature of 2200 ° C.
Effective volume from 4.5 liters to 13 cubic meters (can be larger, depending on customer requirements)
Adopt independent heater to heat in zone
The optimal temperature homogeneity in the effective space can be up to + or - 2 K
The vacuum range can reach 1·10-5 mbar (1·10-3 Pa).
Able to operate safely and reliably under combustible gas
The whole process is fully automatic operation
PC operation, including data recording and data storage.
Mature technology, high reliability, long reputation in the market;
Excellent temperature uniformity during vacuum and process gas operation ensures high quality products.
Carefully designed safety concept and system, so that the furnace operation is reliable and fully automated;
Comprehensive testing and complete thermal test are carried out before delivery, so that the furnace can be put into production more quickly on the user side.
Due to its high reliability, process repeatability and long service life, the product has the lowest "total cost of ownership" and can quickly recover the investment cost.