How to solve roots blower overload operation
What kind of reaction will happen if the used items are beyond your scope, such as how to solve the problem of Roots blower in case of load operation, and what should be paid attention to in the process of load operation? Please follow the manufacturer of Roots blower to see what is going on? It will be helpful to friends who don't understand this problem.
In general, if it is rated load, it is very normal, if it is overload, it is totally abnormal. For example, in solving the problem that roots blower works normally, it is impossible to completely close the valve at the inlet and outlet, let alone overload operation, which is even more inaccurate. Some factories use roots blowers. To solve roots blowers, it is better not to stop suddenly at full load, but to stop after unloading step by step, which can avoid damage to the machine. Due to its characteristics, it is not allowed to return the gas from the exhaust port to the air inlet for a long time, which has an impact on the safety of the machine oil. In this case, cooling measures should be taken.
Sometimes, you will see the splash of lubricating oil, which requires careful observation of the splash and the location of the oil quantity. If the oil quantity reaches the minimum limit, fill the roots blower with lubricating oil immediately to avoid accidents. If the load is found, it is necessary to adjust the load step by step until it reaches the standard. It is not allowed to adjust to the rated load at one time. It can also be controlled by the pipeline or valve installed nearby.
In fact, in the use of Roots blower, whether it is the location of its inlet or outlet, the side should pay attention to, once found problems, to solve immediately, so as to avoid more problems. So it's very important to know about it.