Effect of Vacuum Pump in Different Applications
Because the functions of all kinds of vacuum pumps are different, except that they can satisfy the matching point for the container to stop vacuum pumping. Therefore, when choosing a pump, it is necessary to understand that the mission of the pump in the vacuum system is very tense. The influence of the pump in various categories of different things can be summed up in the following aspects.
1. Making the Main Pump in the System
The so-called main pump is a vacuum pump that indirectly stops vacuum pumping on the vacuum system being pumped by the container in order to obtain the vacuum required for satisfying the technological requirements.
2. Coarse Pump
Coarse pumping refers to a vacuum pump that can start things by lowering the pressure of the vacuum system from the beginning of atmospheric pressure to another pumping gas system.
3. Front-stage pump
Front-stage pump is a vacuum pump used to maintain the front-stage pressure of another pump below its maximum allowable front-stage pressure.
4. Maintenance pump
Maintenance pumps refer to serious air system pumping very small, can not be useful in the application of important front-stage pumps. To this end, a vacuum pump with a smaller pumping rate is added to the vacuum system to help the front pump maintain the normal operation of the main pump or maintain the high-pressure vacuum pump needed for the idle container.
5. Coarse Vacuum Pump or Low Vacuum Pump
Coarse and low vacuum pumps refer to vacuum pumps in the range of low vacuum or rough vacuum pressure when the pressure of the container is lowered from the beginning of the atmosphere.
6. High Vacuum Pump
High vacuum pump refers to the vacuum pump in the field of high vacuum.
7. Ultra High Vacuum Pump
Ultra-high vacuum pump refers to the vacuum pump in the field of ultra-high vacuum.
8. Booster Pump
Booster pump refers to a vacuum pump that works between a low vacuum pump and a high vacuum pump in order to improve the volume of the pumping gas system in the central pressure range or to lower the pumping speed of the front stage pump.