2BE3 series water ring vacuum pump
2BE3 series of water rings operate under rough vacuum, and the working conditions of liquid ring pump are often extremely harsh. The 2BE3 series has been designed with sufficient consideration that it must be able to remove all kinds of gases. It has been widely used in papermaking, coal mine, power plant, vacuum filtration, chemical, petrochemical and food processing industries.
2BE3 can be used with a variety of driving devices, such as belt drive, gearbox, synchronous motor, variable frequency governor, etc. In addition, in order to save space, a series operation mode driven by an electric motor can be used, and four pumps can be connected in series at most.
The left and right sides of 2BE3 can be operated under different vacuum degrees when the middle partition is used. As long as the two parts of suction pressure difference is less than 80 kpa, a 2 be3 vacuum pump can completely as two independent vacuum pump to use this feature to further improve the 2 be3 vacuum pump operating flexibility.
1. There are large inspection ports on both sides of the pump cover, which can check the clearance, corrosion condition and scale.
2.2 the BE3 vacuum pump also reserves the top and side suction and exhaust flanges at the same time, and has the same caliber. The site installation is more flexible and convenient.
3. The bearings are all imported with original imported bearings, ensuring the precise positioning of the impeller of the 2BE3 vacuum pump and the high stability during operation.
4. The impeller material are all made of ductile iron casting or steel plate, stainless steel plate welding, fully guarantee the 2 be3 vacuum pump impeller in the stability of all kinds of bad working conditions, and greatly improving the service life of 2 be3 vacuum pump.
5. The pump body is made of steel plate or stainless steel plate, which improves the service life of 2BE3 vacuum pump.
The shaft sleeve of the BE3 vacuum pump is the most vulnerable part. The company is made of stainless steel, which is five times higher than the ordinary material life.
7. Belt pulley (belt drive) adopts standard high precision cone pulley, reliable operation, long belt life and convenient disassembly.
8. Unique upper air water separator saves space and reduces noise effectively.
9. All castings are made of resin sand with good surface quality. The casting surface does not need to be bored, so that the 2BE3 vacuum pump has the best heat dissipation effect.