Vacuum oven is a kind of box drying equipment which dries materials under negative pressure. It uses a vacuum pump to pump air and humidity, so that a vacuum state can be formed in the working chamber, and the boiling point of water can be reduced, thus drying speed can be achieved. Vacuum oven is specially designed for drying heat-sensitive, easy and oxidizable materials. When working, it can keep a certain degree of vacuum in the working room, and can fill inert gas into the interior. Especially some articles with complex components can also be dried quickly. Intelligent digital temperature regulator is used to set, display and control the temperature. Vacuum oven is widely used in biochemistry, chemical pharmacy, health, agricultural scientific research, environmental protection and other research and application fields, as powder drying, baking and various glass containers. It is especially suitable for rapid drying of heat sensitive, oxidizable and complex components. The utility model has the advantages of fast drying speed, low pollution and no damage to the internal quality of the dried articles. (Drug drying, packaging and heat treatment/medicine, metallurgy, electronic hardware, food, chemical industry, PCB baking)
1. Xingtuo High Temperature Nitrogen-filled Vacuum Oven is fully automatic LED vacuum oven equipment, explosion-proof vacuum oven.
2. Vertical cuboid studio, to achieve volume, microcomputer temperature controller, temperature control
3. The closure and tightening of the box body can be adjusted. The integrally shaped silicone rubber door sealing ring ensures high vacuum in the box.
4. The inner gallbladder is made of stainless steel mirror panel by argon arc welding. The outer gallbladder is treated with SECC steel plate paint.
5. The built-in movable pulley is easy to move and place and has strong positioning screw fixed position.
6. Storage, heating, testing and drying are carried out in an environment free of oxygen or filled with inert gases, which can prevent oxidation of dry materials.
1. Industrial oven temperature range is wide.It is suitable for high temperature test, baking, oven heat treatment or other heating.
2. The working temperature of the oven can start at room temperature and stop at room temperature. Within this range, the working temperature of the oven can be selected arbitrarily. After selection, the oven temperature can be kept constant by means of the automatic control system in the oven.
3. The constant temperature oven is equipped with an electric blower, which promotes mechanical convection of hot air in the oven room and makes the indoor temperature more uniform.
4. The oven structure, temperature control sensitivity and accuracy, simple operation, industrial and mining institutions and scientific research institutions can be used.
5. The industrial oven is a new generation of products. The digital display instrument is used to measure temperature. The temperature control is flexible, accurate, clear and intuitive. The oven body of industrial oven is processed and formed by NC machine tool, which is beautiful and generous in shape, and has no reaction handle, so it is easy to operate.
6. The inner gallbladder is made of imported stainless steel (SUS304) mirror panel, and the outer gallbladder is sprayed with A3 steel plate, which increases the appearance texture and cleanliness. Double-layer high-tension sealing strip is used between the door and the box to ensure the sealing of the test area.
7. Air supply mode: forced circulation air supply.
Oven body structure:
1. The industrial oven is composed of chamber, heating system, electrical control system, air supply system, protection system, etc.
2. The box body is made of advanced equipment, process flow in the industry, smooth lines, beautiful and generous;
3. The material of the studio is stainless steel SUS304, the material of the outer box is cold rolled steel plate, and the outer shell of the product is sprayed with environmental protection metal paint. The overall design is beautiful and generous, which is suitable for the color matching of the laboratory.
4. The shelf height and the number of shelves can be adjusted arbitrarily according to the user's requirements.
5. The insulation material between the studio and the outer box is superfine glass fibre insulation cotton, the thickness of insulation layer is more than 70 mm, the insulation effect is good, and the insulation structure with high performance. From inside to outside, there are inner cavity, inner shell, ultra-fine glass fiber, aluminum reflective aluminum foil, air sandwich, and less heat loss of inner gallbladder. The structure of the inner and outer chambers and portal gallbladder is unique, which greatly reduces the heat transfer of the inner chamber.
6. High performance sealing material and unique rubber sealing structure are used between door and door frame, which has good sealing, high temperature resistance and performance.
7. The inner air duct of the box is composed of a double-cycle system, stainless steel multi-wing centrifugal wind wheel and circulation air duct. The heat of the electric heater placed on the back of the box is discharged forward through the side air duct. After drying, it is inhaled by the centrifugal wind wheel on the back to form a reasonable air duct, which can make the hot air convection sufficiently and make the temperature limit in the box uniform. It improves the heating capacity of air flow and greatly improves the temperature uniformity of the drying box.
8. The heater is heated by stainless steel electric heating tube, which has fast heating and long service life.
1. Temperature range: RT-300 C arbitrarily regulated constant temperature (400 500 or above can be customized)
2. Input power: customization
3. Power supply: It can provide power supply for countries such as 110V/220V/380V/415V/440V. (50/60) Hz
4. Temperature fluctuation: +1 C
5. Temperature uniformity: no-load (+2.5%)
6. Temperature rising rate: 50-200 C within 30 minutes
7. Internal material: SUS stainless steel plate, external material: cold rolled steel plate
8. Heater: Sheathed Electric Heating Tube
9. Devices: Overtemperature Protection Device, Motor Overheat Current Protection, Air Switch, etc.
10. Temperature control: SSR (SCR) contact mode output is optional, automatic PID control, LED digital display
11. System: Using special high temperature resistant long axis motor and strong multi-wing wind blade, strong suction mechanism can obtain uniform temperature distribution, quiet and low noise, and save energy.
12. Standard accessories: thermal insulation timer, single-stage temperature controller
13. Options: 1-point (multi-point) temperature recorder, programmable temperature controller, trolley, stainless steel punch disc, electromagnetic door clasp, motor speed regulator, tricolor tower lamp, detection hole, PLC control, touch screen control
14. Other specifications: The company can also undertake the design and manufacture of various large ovens according to customer requirements.